10
To set the "Monochrome Image density correct" function
This function allows the image density of black-and-white copies to be
adjusted. (This function is only available on the CF2002.)
(The default setting is [the standard setting (middle setting)].)
1
Press the [Utility] key.
2
Touch [Admin. Mode].
3
Using the keypad, enter the administrator access code.
4
Touch [Expert Mode].
5
Touch [Monochrome Image density correct].
6
Touch
7
Touch [Enter].
8
Touch [Fin. Time] in the next three screens that appear.
To set the "Stabilizer" function
If the image is incorrect, even after the gradation levels have been
adjusted, set the "Stabilizer" function, available on the Admin. Mode
screen.
For details on adjusting the gradation levels, refer to "To set the
"Gradation Adjust" function" (p. 10-39).
Setting the "PRT Area" Functions
This function is used to adjust the image print position from the edge of
the paper.
10-30
and
to adjust the image density.
Administrator Mode Operations
CF2002/CF3102