Administrator Mode Operations
To set the "Thick Paper and OHP Film Image Density" function
This function allows the density of the image printed on thick paper and
overhead projector transparencies to be adjusted. (The default settings
are [the standard settings (middle settings)].)
1
Press the [Utility] key.
2
Touch [Admin. Mode].
3
Using the keypad, enter the administrator access code.
4
Touch [Expert Mode].
5
Touch [Thick Paper and OHP Film Image Density].
6
Touch
7
Touch [Enter].
8
Touch [Fin. Time] in the next three screens that appear.
CF2002/CF3102
and
to adjust the image density.
10
10-25