Making Test Copies (Copy 1 Set); To Make A Test Copy - Minolta CF 2002 Advanced Information

3

Making Test Copies (Copy 1 Set)

Before printing a large number of copies, a sample copy can be printed so
you can check the specified settings. This is convenient for checking the
selected settings before printing.
If a job is currently being printed, that job is interrupted so one test copy
can be printed. After the single test copy is printed, the interrupted job
automatically continues printing.
The number of copies remaining after the test print are recorded and the
job is queued to be printed.

To make a test copy

1
Select the desired Copy mode settings.
2
In the Basic screen, touch [Copy 1 Set].
3
Press the [Start] key. Scanning of the document begins, and the job is
queued.
4
Only one test copy is printed. Check the test copy.
A message appears, asking if the job should be continued.
3-36
Before Making Copies
CF2002/CF3102