Advanced Operations
Operation Description
For more details on functions and operating procedures, refer to the
manual for the printer controller.
1
Press the [Scan] key.
The Destination screen appears.
If the printer controller is not
installed, the Destination screen
does not appear when the [Scan]
key is pressed, and the copier does
not enter Scan mode.
2
Specify the appropriate settings.
3
Specify the recipient (where the scan data will be sent) and the
scanning mode, and then specify any other necessary settings.
4
Press the [Start] key to start
scanning and sending the data as
specified.
CF2002/CF3102
7
7-77