Table of Contents
Advertisement
Utility Mode Operations
To set the "Key Repeat Start Time/Interval" function
The length of time until the repeat feature for a key starts when a key in
the touch panel is held down can be specified. (The default setting for the
start time is 0.8 second and the default setting for the repeat interval is 0.1
second.)
The settings for the repeat feature are only applied in the Enlarge Display
mode; they are not applied when the screen is displayed normally.
1
Press the [Utility] key.
2
Touch [User's Choice: 1].
3
Touch [Key Repeat Start Time/Interval].
4
Touch [▲] and [▼] to specify the desired length of time until the repeat
feature for a key starts (between 0.1 and 3.0 seconds).
5
Touch [Enter].
6
Touch [Fin. Time], and then touch [Fin. Time] again in the screen that
appears.
CF2002/CF3102
9
9-19
Advertisement
Table of Contents
