Table of Contents
Advertisement
Administrator Mode Operations
There are three "PRT Area" margin functions:
G
[PRT Area (Top Margin)] refer to p. 10-31
This function adjusts the starting print position at the leading edge of
the paper (with regard to the paper feed direction).
G
[PRT Area (Left Margin)] refer to p. 10-33
This function adjusts the starting print position (with regard to the
paper feed direction) from the left edge of the paper.
G
[PRT Area (Dup. Left Margin)] refer to p. 10-35
This function adjusts the starting print position at the left edge of the
paper for the second side of a double-sided copy.
To set the "PRT Area (Top Margin)" function
The top margin of the printing area can be adjusted for each paper type.
The top margin of the print area is adjusted during manufacturing of the
copier. Normally, the top margin will not need to be adjusted.
1
Load A3-size paper of the desired type into the 1st drawer.
2
Turn the media type selection dial to
the setting for the type of paper
loaded.
3
Press the [Utility] key.
4
Touch [Admin. Mode].
5
Using the keypad, enter the
administrator access code.
6
Touch [Expert Mode].
7
Touch [PRT Area (Top Margin)].
CF2002/CF3102
Envelope
Plain
Plain
OHP
Thick1
Thick1
Thick2
Thick3
Thick2
Thick3
10
10-31
Advertisement
Table of Contents
