9
Using Copy Programs
A user-specified copy mode can be stored as a copy program.
Each of the 10 copy programs that can be stored can be given a name (up
to 9 characters long).
To store a copy program
1
Select the desired Copy mode settings.
H
For details on selecting Copy mode settings, refer to chapter
"6 Basic Operations".
2
Press the [Utility] key.
3
Touch [Input].
4
Touch [Job Memory Input].
5
Touch the number of the program where you wish to store the settings.
A screen appears, allowing you to enter the name of the program.
9-6
Utility Mode Operations
CF2002/CF3102