To Set The "Sleep" Function - Minolta CF 2002 Advanced Information

9

To set the "Sleep" function

This function is used to specify the length of time after the last operation
until the copier automatically enters Sleep mode. The copier only enters
Sleep mode if the "Disable Sleep Mode" function of the Administrator
mode is set to "No". (The default setting is "30 min".)
For details on the Sleep mode, refer to "Feeding the Document" on
page 5-5.
1
Press the [Utility] key.
2
Touch [User's Choice: 1].
3
Touch [2/2].
4
Touch [Sleep].
5
Press the [C] (clear) key.
The current setting is erased.
6
Using the keypad, enter the desired length of time (between 15 and
240 minutes).
9-24
Utility Mode Operations
CF2002/CF3102