Table of Contents
Advertisement
Getting to Know Your Copier
2.6
Auxiliary Functions
Panel Resetting
The Panel Reset key resets all control panel settings to default settings
including the number of copies and zoom ratio.
If the duplexing document feeder is used, the original present on the
original glass will be ejected out of the unit.
Useful Tips
The Panel Reset key enables you to cancel all previous settings
efficiently.
To avoid miscopy, try to press this key before making any setting for
your own copy job.
Pressing this key does not cancel the Interrupt mode.
Auto Panel Reset Function
The Auto Panel Reset function is automatically activated to return the
copier to the default settings 5 min. after the copier has been touched last.
Useful Tip
The time for the copier to enter the Auto Panel Reset function can be
selected from 1 to 9 min. by using User's Choice. Also, the Auto Panel
Reset function can be disabled by the User's Choice, see page 5-30.
Energy Saver Mode
If the copier is shut down when it is not in use, it takes the copier approx.
9 min. to complete the warm-up cycle. Instead of turning the copier OFF,
it's a good idea to use the Energy Saver mode. This mode will minimize
the time for the copier to complete the warm-up cycle to about 60 sec.
The Energy Saver mode is automatically activated a given period of time
after the copier has been touched last. The initial setting is 15 min.
Pressing the Energy Saver key sets the copier into the Energy Saver
mode.
To cancel the Energy Saver mode, press any key on the control panel, for
instance, the Start key.
CF9001
2
2-13
Advertisement
Table of Contents
