Table of Contents
Advertisement
6
4
Touch [Next] to display the third screen of settings.
5
To change a setting:
H
Touch the setting that you wish to change. The corresponding
screen appears.
H
Change the setting as desired.
Tip
The corresponding screens for the "Scan to Memory", "Separate
Scan", "Copy 1 Set" and "Neg. Pos. Reverse" functions and the
"Glossy Mode" setting are not displayed. Perform the usual procedure
to display the corresponding screens when changing these settings.
To change the settings
1
Press the [Mode Check] key.
2
Touch [Next] or [BackUp] until the screen containing the setting that
you wish to change appears.
3
Touch the setting that you wish to change. The corresponding screen
appears.
4
Change the setting in the same way that it would normally be set.
6-40
Basic Operations
CF2002/CF3102
Advertisement
Table of Contents
