8
Storing a 1st drawer/Non-Standard Paper Size
Two non-standard (custom) paper sizes can be stored.
1
Touch [Paper].
2
Select the 1st drawer, and then
touch [Size Change].
3
Touch [Size Registration].
H
To specify a paper size in inch
measurements, continue with
step 4.
H
To specify a paper size in metric
measurements, skip to step 6.
4
Touch
is loaded. (between 5 1/2 inch and 18 inch)
H
Touch
to change.
The entered length of side X appears. (For this example, 11 1/2 inches
is specified.)
5
Touch
that is loaded. (between 3 9/16 inch and 12 1/4 inch)
8-28
, and
to select the length of side X for the paper that
until the cursor moves below the fraction that you wish
,
, and
to select the length of side Y for the paper
Enlarge Display Mode
CF2002/CF3102