Table of Contents
Advertisement
8
Confirming the Cancellation of the Enlarge Display Mode
If no key on the copier is pressed or the copier performs no operation for
one minute, the machine automatically resets all modes and functions to
their default settings and the standard-sized screen is displayed. (The
default setting for the "Auto Panel Reset" function is "1 min.")
At that time, the message requesting confirmation to cancel the Enlarge
Display mode appears.
G
To continue specifying settings using the Enlarge Display mode, touch
[Yes].
G
To cancel the Enlarge Display mode and display the standard-sized
screen, touch [No].
G
If no key is touched, the Enlarge Display mode will be cancelled and
the standard-sized screen is displayed after the length of time (30, 60,
90 or 120 seconds) specified using one of the User's Choice functions
has passed.
Tip
In order to display the message requesting confirmation to cancel the
Enlarge Display mode, the corresponding User's Choice function must
be specified.
The default setting is "No" (the standard-sized screen is displayed
without the message requesting confirmation to cancel the Enlarge
Display mode appearing). For details, refer to "Utility Mode
Operations" on page 9-1.
8-4
Enlarge Display Mode
CF2002/CF3102
Advertisement
Table of Contents
