Simplex Configuration - Installing The Sc Software - Avaya G860 Installing And Operating

* script on Active SC after reboot.
**********************************************************
**************************************
* IF CONFIGURATION IS DONE OK
* YOU MUST REBOOT THE SC !!!!!!!!!!! *
**************************************
Even though this configuration is for the secondary SC, the following is displayed:
IMPORTANT: If you have second SC, DO NOT REBOOT this SC until
installation
9. You are prompted to reboot. Enter y or accept the default setting to do so.
Do REBOOT now (n/y)
10. You are prompted to confirm the reboot command. Enter Y or accept the default
setting to do so.
Are you sure (n/y)
14.2.6

Simplex Configuration - Installing the SC Software

To install the SC software, take these 16 steps:
1. Follow the installation scripts shown in the example below.
2. Log on using the default username: root and password: root.
3. Enter the /install.pl command. The software installation & basic configuration
menu appears.
4. Enter number 2 to start the installation sequence.
Note:
Example for the installation script:
Entered text is shown in bold.
of second SC already done !!!
Reboot both SCs at the same time.
The installation procedure rewrites the "~/.cshrc" file.
14. Hardware Replacement Procedures
*
[y]: y
[y]: y
Issue 1 October 2007 141
*