Avaya G860 Installing And Operating page 85

You will be asked for root password on 10.7.13.80.
-------------------------------------------------------------------
-
root@10.7.13.80's password:
SystemParams.ini
00:00
------------------------------------------------
Configuration Summary:
------------------------------------------------
Global SC IP Address
Master SC IP Address
Redundant SC IP Address (or 1.1.1.1 if none)
EMS Server IP Address
NTP Server IP Address
Enable Security
EMS IKE Pre-Shared Key
SC Root Password
SNMP Read Community
SNMP Write Community
Product Type
------------------------------------------------
Start configuring (y/n)
The following is displayed:
>>> Update /etc/inet/inetd.conf file ...
>>> Restore file /etc/inet/inetd.conf from the backup ...
>>> Update /etc/inet/services file ...
>>> Restore file /etc/inet/services from the backup ...
>>> refresh INET daemon ...
>>> Update root password ...
>>> Disable IPSEC configuration ...
>>> Configure Timer Resolution ...
>>> Make backup of modified file /etc/system ...
>>> Configure alternate break sequence ...
>>> Make backup of modified file /etc/default/kbd ...
>>> Configure TFTP ...
>>> Make backup of modified file /etc/inet/inetd.conf ...
>>> refresh INET daemon ...
>>> Configure FTP ...
>>> Permit root login to FTP ...
>>> Make backup of modified file /etc/ftpd/ftpusers ...
>>> audcftp user is already defined ...
>>> Configure SSH ...
>>> Permit root login to SSH ...
>>> Make backup of modified file /etc/ssh/sshd_config ...
>>> Refresh SSH daemon ...
9. Configuring System Controller Software for the First Time
100% |*****************************|
: 10.1.2.3
: 10.1.1.1
: 10.6.1.8
: 10.2.229.57
: 1 (yes)
: ******
: ******
: ******
: ******
: 2 (mediant5000)
5421
: 10.6.8.29
[y]: y
Issue 1 October 2007 85