Performing The Basic Sc Configuration; Basic Sc Configuration On The First Sc Board - Avaya G860 Installing And Operating

Avaya G860 Media Gateway
9.5.2

Performing the Basic SC Configuration

During the basic configuration of the first SC board, the IP addresses you have
defined are entered at the appropriate prompts.
9.5.2.1

Basic SC Configuration on the First SC Board

To perform the basic SC configuration on the first SC board, take
these 12 steps:
1. Follow the configuration scripts shown in the example below.
Example of Part 1 of the basic configuration process:
Entered text is shown in bold and the IP addresses are assumed for the purposes of
this example. Note the keyboard shortcuts detailed in the middle of the Example
below.
~> /install.pl
Found uncompressed Avaya installation package...
Verify installation package integrity...
-------------------------------------------------
SC software installation & basic configuration
-------------------------------------------------
1 - Update SC network parameters.
2 - Install and configure.
3 - Change installed configuration.
4 - Copy configuration from Primary SC.
5 - Uninstall SW.
0 - Quit.
Choose (0-5) : 3
------------------------------------------------
System configuration
------------------------------------------------
Keyboard shortcuts:
ENTER
\
Ctrl-C - abort configuration script
2. At the Global SC IP address prompt, enter the IP address to be the one used to
interface externally.
Global SC IP address
78 Installation & Operation Manual
- leave default parameter value
- return to previous parameter
[0.0.0.0]: 10.1.2.3