Alarm Indicators - Avaya G860 Installing And Operating

Avaya G860 Media Gateway
2.4.2.1

Alarm Indicators

The table below describes the chassis' front panel alarm indicators.
Table 5: Chassis Front Panel Alarm Indicators and Buttons
Component Description
SYSTEM Indicates that the
LED System Controller
board is properly
functioning
CRITICAL Indicates the
LED detection of a fault
(or faults) -
categorized as
'Critical'
MAJOR LED Indicates the
detection of a fault
(or faults) -
categorized as
'Major'
MINOR LED Indicates the
detection of a fault
(or faults) -
categorized as
'Minor'
SHELF LED Indicates the
health or failure of
the chassis'
hardware as
detected by the
alarm module
ACO Alarm Cut Off
Pushbutton
Pushbutton For future use
22 Installation & Operation Manual
Color Code Remarks
Green Steady Green indicates proper SC board
functioning
Red Default
Steady Red during initialization of active SC
Green Green when no critical alarms
Red Default
Red when critical alarm is set. When This
LED is on, all other Major and Minor
severity LED are also lit
Green Green when no Major alarms
Orange Default
Orange when Major alarm is set. When this
LED is on, the Minor severity LED is also lit
Green Green when no Minor alarms
Orange Default
Orange when minor alarm is set
Green Green when initialization is completed
Red Default
Red during initialization process
--- Used to mute the Telco alarm relay devices
attached to the SA/RTM. Returns all of the
alarm relays to normal position, deactivating
the alarm relay devices. The chassis LEDs
and other gateway alarm signals are NOT
affected.
Accessed with finger
---