Avaya G860 Installing And Operating page 139

------------------------------------------------
8. You are prompted to start the configuration. Enter Y or accept the default settings
to do so.
Start configuring (y/n)
The following appears:
>>> Update /etc/inet/inetd.conf file ...
>>> Restore file /etc/inet/inetd.conf from the backup ...
>>> Update /etc/inet/services file ...
>>> Restore file /etc/inet/services from the backup ...
>>> refresh INET daemon ...
>>> Update root password ...
>>> Disable IPSEC configuration ...
>>> Configure Timer Resolution ...
>>> Make backup of modified file /etc/system ...
>>> Configure alternate break sequence ...
>>> Make backup of modified file /etc/default/kbd ...
>>> Configure TFTP ...
>>> Make backup of modified file /etc/inet/inetd.conf ...
>>> refresh INET daemon ...
>>> Configure FTP ...
>>> Permit root login to FTP ...
>>> Make backup of modified file /etc/ftpd/ftpusers ...
>>> audcftp user is already defined ...
>>> Configure SSH ...
>>> Permit root login to SSH ...
>>> Make backup of modified file /etc/ssh/sshd_config ...
>>> Refresh SSH daemon ...
>>> Update SNMP configuration files ...
>>> Make backup of modified file /etc/srconf/agt/snmpd.cnf ...
>>> Update SNMP community strings ...
>>> Update /etc/inet/services ...
>>> Make backup of modified file /etc/inet/services ...
>>> kill solaris SNMP deamon if exists ...
>>> Remove startup script of solaris SNMP deamon ...
>>> Make backup of deleted file /etc/rc3.d/S76snmpdx ...
>>> Make backup of deleted file /etc/init.d/init.snmpdx ...
>>> Remove /usr/lib/smpdx ...
>>> Make backup of deleted file /usr/lib/snmp/snmpdx ...
>>> Configure boot scripts ...
>>> Make record of new file /etc/init.d/TG-1000 ...
>>> Make record of new file /etc/rc3.d/S90_TG-1000 ...
>>> Configure password recovery scripts ...
>>> Make record of new file /etc/init.d/pwd ...
14. Hardware Replacement Procedures
[y]: y
Issue 1 October 2007 139