Table of Contents
Advertisement
Avaya G860 Media Gateway
Note 1:
By enabling Security here, the Security features of the EMS are enabled.
Note 2:
The IKE Pre-Shared Key entered here appears in the EMS as the OAM
Security Profile also disguised with asterisks.
Note 3:
Changing the IKE Pre-Shared Key can only be done using the install.pl
script.
Note 4:
Use of the Security settings must be agreed upon by both sides of the
connection.
9.
You are prompted to enter the SC Root Password and the passwords for SNMP
Read and Write Community. To leave a password unchanged, press Enter. To
change a password, enter the new password. It must be at least 4 characters.
You are prompted to re-enter the new password.
The default passwords are:
•
SC Root - root
•
SNMP Read Community - public
•
SNMP Write Community - private
Note:
For security reasons, it is recommended to change these passwords and
make a note of the new passwords you enter for future reference.
SC Root Password
SNMP Read Community
SNMP Write Community
A summary of the settings is displayed.
----------------------------------------------
Summary:
Global IP Address:
Master SC IP Address:
Redundant SC IP Address:
EMS server:
NTP server:
Enable Security
SC Root Password
SNMP Read Community
SNMP Write Community
----------------------------------------------
10. You are prompted to start configuring. Enter y to commence the configuration.
Start configuring ([y]/n)
80 Installation & Operation Manual
[leave unchanged]: ******
[leave unchanged]: ******
[leave unchanged]: ******
10.1.2.3
10.1.1.1 (sc1)
10.6.8.29 (sc2)
10.6.1.8
10.2.229.57
:
0 (no)
:
******
:
******
:
******
[n]: y
Advertisement
Table of Contents
Troubleshooting
