Process Vxml File(S); Process Prerecorded Tones File(S) - Avaya G860 Installing And Operating

Avaya G860 Media Gateway
18.1.3

Process VXML File(s)

Note: The VXML utility is applicable to IPmedia only.
To produce a VXML file, take these 5 steps:
1. Prior to the conversion process the user should prepare a valid VXML file.
2. Execute DConvert.exe and click the Process VXML file(s) button. The VXML
file(s) window appears.
3. Click the Select File button. A Browse window appears.
4. Navigate to the desired location and select the file to be converted. (This
automatically designates the output file as the same name and path, but with the
dat extension).
5. Click the Make File button. The VXML file is generated and placed in the same
directory as shown in the Output File field. A message box informing you that the
operation was successful indicates that the process is completed.
18.1.4

Process Prerecorded Tones File(s)

To generate a Prerecorded Tones file, take these 11 steps:
1. Prior to the conversion process, the user should prepare the appropriate
prerecorded tones file(s).
2. Execute DConvert.exe and press the Process Prerecorded Tones file(s)
button. The Prerecorded Tones file(s) window appears.
3. Select the raw Prerecorded Tones files (created in Step 1) utilizing one of these
actions:
a.
194 Installation & Operation Manual
Figure 49: VXML Dialog Box
Click the Add Files button in the upper right corner. The Add Files window
appears. (Refer to the figure, Select Files Window.)
Navigate to the appropriate file.