Avaya G860 Installing And Operating page 76

Avaya G860 Media Gateway
2. Stop SC software by running tools tg dn command.
3. Return to the console terminal and update the following network configuration
information using the existing install.pl script.
Note: Be sure to enter the IP addresses carefully. Errors can prevent the system
from connecting to the network.
Note: All IP addresses and unique names in the following examples are for
demonstration purposes only and must be designated by the customer
according to his system requirements.
Example of the basic configuration process:
Entered text is shown in bold and the IP addresses are assumed for the purposes of
this example.
~> /install.pl
Found uncompressed Avaya installation package...
Verify installation package integrity...
-------------------------------------------------
SC software installation & basic configuration
-------------------------------------------------
1 - Update SC network parameters.
2 - Install and configure.
3 - Change installed configuration.
4 - Copy configuration from Primary SC.
5 - Uninstall SW.
0 - Quit.
Choose (0-5) : 1
*****************************************************
**
** This option will change IP parameters of
** current SC board.
**
*****************************************************
4. At the Node name prompt, enter the unique name you designate for the SC
board on which you are installing the software. Press Enter.
SC name (node name)
SC1
5. Enter the correct IP address for the SC board and press Enter.
76 Installation & Operation Manual
**
**
**
**
[clientxx]: