Modifying An Media Gateway Board Configuration - Avaya G860 Installing And Operating

9. Unlock the locked section by setting tgBoardActionType = unlock.
When these actions are complete, the specific slot is configured with a specified
board type. All other board parameters are configured with the default values.
Refer to the Programmer's User Manual, Document#: LTRT-914xx, for the list
and description of the board parameters and the default values.
10. Check if an inserted board is operational by examining for the
moOperativeStateChange alarm, which indicates AlarmSource = selected board#
and ProbableCause = enabled.
19.1.2

Modifying an Media Gateway board Configuration

This section provides a brief process description of modification of board
configuration. For a detailed description of the configuration methodology and detailed
board parameters refer to the Programmer's User Manual, Document#: LTRT-914xx.
To modify the configuration of a Media Gateway board, take these
4 steps with the MIB elements located under the following path:
..\tgConfig\tgModule\tgTPBoardTable\tgTPBoardEntry
1. Lock the configured MIB section by setting the tgBoardActionType = lock. As a
result:
When working with a MIB browser, a slot Table of 22 slots is displayed.
Select the appropriate specific slot number.
2. Modify one of board's parameters, which have read-write access. For example,
the obvious parameters that can be changed:
tgTPBoardEnableDignostics to enable/disable power-on self-tests on the board.
3. Verify the performed operation by reading the appropriate parameter.
4. Unlock the locked section by setting the tgBoardActionType = unlock.
When working with a MIB browser, a table of the slots is displayed.
Select the appropriate specific slot number.
When these actions are complete, the specific slot is configured with appropriated
settings. All other board parameters are configured with the default values.
19. Appendix - Getting Started with MIBs
Issue 1 October 2007 203