Avaya G860 Installing And Operating page 94

Avaya G860 Media Gateway
7. You are prompted to accept the default backup file name (Project.backup.tar) or
type in the correct name for the backup file. Be sure the name you type in
matches the backup tar file from which you want to restore.
8. Press Enter. The restore process using the tar file begins.
Backup file name [/Project.backup.tar]:
/Project.backup_02_12_2004.tar
Restore backup file /Project.backup_02_12_2004.tar
Execute tar xvf /Project.backup_02_12_2004.tar /Project ...
9. The full list of all of the software installation and configuration elements are listed
until the restore procedure is complete.
10. Repeat steps 1 to 10 for the second SC board.
11. Startup the system either using the EMS (refer to EMS documentation) or by
typing the command at the Telnet prompt, tools tg up. You are prompted to
confirm this command.
94 Installation & Operation Manual