Table of Contents
Advertisement
Avaya G860 Media Gateway
7.
To restore the SC software from the pre-upgrade backup image, at the prompt
type tools tg rs 2 and press Enter.
client208::~# tools tg rs 2
If you downgraded the OS on the SC board, the above command may fail
because the tools script is missing.
client208::~# tools tg rs 2
tools: Permission denied
8.
If the tools script is missing, extract the tools script from the backup file, by
typing tar xvf [backup_file] /Project/scripts/tools. Press Enter.
client208::~# tar xvf [backup_file] /Project/scripts/tools
9.
At the prompt, run the extracted tools script by typing /Project/scripts/tools tg rs
2. Press Enter.
client208::~# /Project/scripts/tools tg rs 2
10. To start the SC software, reboot the Primary SC board by typing. Press Enter.
client208::~# reboot
168 Installation & Operation Manual
Advertisement
Table of Contents
Troubleshooting
