Specifying the Network Settings
You can set the various functions related to networking.
Note
Contact your network administrator if you are unsure about these settings.
Setting Example
Here the procedure for switching the LAN speed is described as an example.
1
Press <Setting>.
2
Press
the [Management] tab.
3
If an administrator password is set,
If an administrator password is not set, proceed to step 5.
4
Enter the administrator password, and press [Enter].
5
Press [Network Settings].
6
Select the function to set.
•
In this example, [Network Connection] is selected.
•
For details on the settings, refer to "
2-40
Specifying the Network Settings
press [Admin Password].
List of Network
Settings".
(See page 2-41.)