Gerber OMEGA CP Reference Manual page 86

72 Chapter 6:
Using Layers
Ch oose which
laye r to display
fr om the drop
down list.
Cli ck a vinyl to
disp lay the list
of foils
assign ed to it.
Rearrange th e
vinyl b y
dragging and
dropping or
using the Up or
Down buttons.
When working with Print Order in Composer consider the following:
♦ You can access the Print/Output Order dialog box (via Arrange > Print/Output
Order) even if there are no objects in a job. This allows you to set Print Order
preferences.
♦ New files created in Composer are based on the type of Print Order preferenced in the
Print/Output Order dialog box. The factory default Print Order is flattened (single
layer). The Output by Layer checkbox is not checked.
♦ Legacy files open with a flattened Print Order so that you can work with them without
modification.
♦ When
using layered Print Order, a vinyl color can appear only once per layer but more
than once in the job's print order if it is assigned to objects on different layers
♦
When flattening the Print Order of a job that has layers, each vinyl color appears onc
with all of its associated foils regardless of the o
♦ The Rebuild button
selected vinyl to the
discarded.
♦ If you have a layered job and use a flattened Print
Order, OMEGA warns you to check your Pr
Order if you rearrange layers. Changing the order of
layers will affect the stacking order of the objects and
may affect your print order.
♦
The Preference button in the Print/Output Order dialog box saves the c
Order settings (flat or layered) and the size of the
Layered Print/Output Order
in the Print/Output Order dialog box returns the foil order of the
original stacking (front to back) order. Previous changes are
riginal layer assignments.
int
icons (large or small).
Turn on the
Output by Layer
checkbox to use
a layered Print
Order.
R earrange the
foils by d ragging
and droppi ng in
the list or by
selecting a foil
and using the Up
or Down buttons.
Clicking R ebuild
returns the Print
Order for the
selected vinyl on
the selected
layer to the
original stacking
order. Unselected
vinyls and layers
are not affected.
e
urrent Print