Gerber OMEGA CP Reference Manual page 723

2 Turn off the foil target by clicking the foil color that has the "T" to the right.
3 Turn on the foil target by clicking a new foil color from the Foil Color list. A "T"
appears to the right.
OPOS Tip: When creating EDGE (screen print) positives, turn off any designated targets.
Choosing either black or the darkest foil in your job for targets
In the Targets Configuration dialog box there are two check boxes that print targets using the
darkest color in the job or using black foil.
To change the targets using Target Configuration
1 Click Print Options > Targets to open the Target Configuration dialog box.
2 Choose one of the following options
♦
Print Targets using the darkest foil in the job – when checked the target
foil automatically becomes the darkest foil in the job versus the first foil in
the job.
709