Gerber OMEGA CP Reference Manual page 731

Getting the status of a MAXX 2 job
The Properties for GerberMAXX2 dialog box has a Get Status button, which allows you to view
the status of a job in the MAXX 2 queue.
To view the status of a job in the MAXX 2 queue
1 Click Get Status.
2 Click the Job ID line from the list of jobs in the queue.
Terminating a MAXX 2 job in the queue
The Terminate button in the Properties for the GerberMAXX2 dialog box allows you to select a
specific job from the MAXX 2 queue and terminate its printing.
To terminate a job in the MAXX 2 queue
1 Click Get Status.
2 Click the Job ID line from the list of jobs in the queue.
3 Click Terminate.
Using Upload as a diagnostic tool
In the GQMgr work space, right-click the GerberMAXX IP address and choose Properties from
the context menu. The Properties for GerberMAXX2 dialog box provides an Upload button,
which is a diagnostic tool. If you call tech support for help with a MAXX 2 problem, the
technician may ask you to use this Upload button to copy certain key files to a local computer.
Once uploaded, you can open the files in Notepad and tell the technician what you see, or
e-mail the files to Gerber for diagnostics.
Updating MAXX 2 firmware with Batch
Occasionally GSP may update the firmware in the GERBER MAXX 2 to a new revision level.
Note: Before installing the GERBER MAXX 2 firmware, it is important to clean out the
c:\Windows\temp directory so there is space to enable you to back up files before installing the
new firmware.
To install GERBER MAXX 2 firmware
1 Click Start > Programs > OMEGA > GQMgr to open the GQMgr dialog box.
2 Right-click on the MAXX icon and choose Properties from the context menu.
717