Gerber OMEGA CP Reference Manual page 517

Creating a line of repeats with incremental spacing
You can incrementally change the spacing between objects by entering a value in the Increment
text box of the Advanced Repeats dialog box. The increment is a space value (distance) added to
the previous space value so that the distance between objects increases or decreases
progressively.
In the following examples, the first set of boxes is evenly spaced. In the second set of boxes, each
gap distance increases by 0.250.
To remove the repeats, Smart Edit the repeated objects to open Advanced Repeats and click
Repeat Off.
To create a line of repeats with incremental spacing
1 Select the object, then click Tools > Advanced Repeats to open the Advanced Repeats
dialog box.
2 Turn on Gap or Center to Center.
3 Enter a value in the Distance text box. For Center to Center, if the distance between
repeats is less than the size of the object, then the repeated objects may overlap.
4 Enter a value in the Increment text box.
5 In the Repeats box enter the number of repeats in the Number text box. You must
choose a number greater than 1 to have the object repeated.
6 Choose a Direction from the drop-down list: Right, Left, Up, or Down.
7 Click Repeat.
503