Gerber OMEGA CP Reference Manual page 77

63
Arrange menu commands/Arrange toolbar
Reorder objects on a layer using the Arrange menu commands or the Arrange toolbar.
To Front, To Back, Front 1, and Back 1 commands only work on the layer on which the object
resides.
The In Front Of or In Back Of commands in the Arrange menu allows you to move the
selected object to a different location on the work surface. Selecting one of the commands
turns the cursor into a target arrow. Click a target object on the work surface and the selected
object is moved in front of or in back of it in the stacking order. To escape the command
without moving an object, reselect the command from the Arrange menu to clear the check
mark, press the Esc key, or right click and select End In Front of (or In Back of) command.
Paste Back in Front Of or Paste Back in Back Of
After cutting or copying an object you can choose to paste it back in
the same position on the work surface either in front or in back of any
object in the stacking order. Paste Back in Front Of and
Paste Back in
Back Of is available when you select and object in the L ayer Tree and
right click to display the context menu.
Moving Smart Edit objects to a different layer
When moving objects that result from any smart edit operation such as text blocks, combines,
groups, warp or distortion results to a different layer, you must select all objects involved to