Gerber OMEGA CP Reference Manual page 635

621
Because each layer behaves like a separate job when outputting by layers, the same vinyl color
can be output multiple times from the same job if it is designed on different layers. Likewise,
the same foil color can be output from different layers.
Merge Layers
The Merge checkbox in the Select Colors dialog box allows you to flatten your selected layers
and print. Choose which layers to merge in a multi-layer job by activating or clearing the
checkboxes in the tree control.
Rewind Between Layers
If Rewind Between Layers is turned ON, each layer will print on top of the previous layer (be
sure to have reduce frame turned OFF if layers need to register with each other). If rewind
between layers is turned OFF, each layer will follow the previous layer. The Rewind Between
Layers option supercedes the end position of the Start/End Position dialog box.
Layers to Output
When the Output by Layer dialog box is turned on the Layers to Output options become
available.
Current Active Layer
By default, when Output by Layer is turned ON the Current Active Layer in the GSPPlot
window will be output.
All Selected Layers
Turn on All Selected Layers to output only the layers that are checked in the Selected Colors
dialog box. Clear the checkboxes for any layers that you do not wish to output. Rewind
Between Layers must be turned on to have this option available. If there is cut data in the job,
the cut data on the layers are "merged" and all cuts are done together.
Properties
Right click a layer in the Select Colors dialog box and choose Properties to display any notes
entered in the Layer Manager Notes field in Composer.