Gerber OMEGA CP Reference Manual page 280

266 Chapter 25:
Solving Printing and Registration Problems
To manually choose color correction
Turn off the Auto Select check box in the Print Option dialog box. The Color Correction list box
is available for you to make the choices for printer, substrate, foil and halftones. Turn off the
Auto Select check box and turn on GA Correction in the Print Options dialog box to match old
GA jobs. In order for the list to be available, you must load the profiles off of the Profile CD that
comes with OMEGA. The list changes based on the device to which you are printing.
Tip: Use the Color Correction list box to match the colors of a job you did with an older version
of GA or other reasons as described in the following guidelines:
Use GA 6.2 Improved for SUPER CMYK™ Foils when using SUPER CMYK foils (this is the
default color correction for jobs using process colors).
Use GA 6.2 Improved for L.T. CMYK Foils when printing a new job with L.T. foils.
Use GA 6.2 SUPER CMYK emulate old CMYK when using SUPER CMYK foils to match a job
done with non-SUPER CMKY foils.
Use GA 6.2 Improved for SUPER CMY Foils when using SUPER CMY foils and don't want to
print black foil.
Use GA 6.2 Improved for Old CMYK Foils when printing a new job with old foils.
Use Traditional (Resin) when using non-SUPER CMYK foils.
Use Heat Transfer Paper (Wax) when using heat transfer paper and LT foils.
Use SUPER CMYK emulate old CMYK Foils when using SUPER CMYK foils to match the colors
produced by SUPER CMYK in GA 6.0 Rev E.
Use No Color Correction when you don't want any color correction.