Gerber OMEGA CP Reference Manual page 684

670 Chapter 61:
Choosing the Plotter or Printer
To choose a plotter and/or a printer
1 Click Setup > Device Select to open the Plotter/Printer Select dialog box.
2 Choose the plotter from the Plotters list and/or a printer from the Vinyl Printers list.
3 Click Preference to make the selected devices the default.
4 Click OK.
Note: If the plotter you want to select is not listed in the Plotters list, you must install it.
Review the section "Installing a new plotter or printer."
To choose a remote printer
1 Click Setup > Device Select to open the Plotter/Printer Select dialog box.
2 Choose a remote printer from the Vinyl Printers list.
3 Click OK. OMEGA creates a spool file and sends it to the remote printer.
Tip: For larger files that will take time to spool, turn on Render Remote from the
Plotter/Printer Select dialog box. This sends all the information to the remote computer to
process.