Gerber OMEGA CP Reference Manual page 671

To select multiple panels to print or plot
1 Click Layout > Panels to open the Panel Setup dialog box.
2 There are two methods to select multiple panels:
♦
In the Select Panels to Print/Plot box, enter the panel numbers separated by
commas (1,2,3) in the Panels text box.
OR
♦
Click the panels you do not want to output. The panels become deselected.
3 Click OK.
To print or plot panels continuously
1 Click Layout > Panels to open the Panel Setup dialog box.
2 In the Panel Type box turn on Continuous.
3 Click OK.
657