Gerber OMEGA CP Reference Manual page 638

624 Chapter 55:
Managing Files in GSPPlot
Batch saving spool files
A PRM file is created when a job is output. If multiple files are processed together (batch files),
it is necessary to save the parameters for each file prior to processing.
To Batch Save Spool Files when the system is unattended
1 Click File > Open to open an existing file.
2 Click File > Save Parameters to create a PRM file.
3 Repeat this process for each PLT file in your batch.
4 Click File > Batch Save Spool File to open the Open dialog box.
5 Choose the folder from Look in.
6 Choose the files to batch process from the list using the Shift or Ctrl keys and the
mouse.
7 Click Open to open the Batch Spool Save dialog box.
8 Choose the type of information to include in the spool file:
♦
If you are saving vinyl-only jobs, click Cut Information. (Print Information
will be grayed.)
♦
If you are saving print and cut jobs, click Print Information and Cut
Information to minimize time required when running the job later.