Gerber OMEGA CP Reference Manual page 473

3 Click the Fill tab and choose Solid to activate the Color and Tint group boxes.
4 In the Color box choose Burgundy.
5 Enter a Tint of 100.
6 Click OK.
7 Use the Box tool to create a square of approximately two inches in height and width.
8 Deselect the box.
To select a fill and create the shadow
1 Click the Fill tool to reopen the Assign Colors dialog box.
2 Define the fill color for the shadow as:
♦
Fill Type = Solid
♦
Color = Cobalt Blue
♦
Tint = 100%.
3 Click OK.
4 Select the box with the Selection tool.
5 Click Tools > Shadow to open the Shadow dialog box.
6 In the Shadow dialog box choose Drop.
7 Turn on Distance.
8 Enter X and Y values, such as .250 (X) and .250 (Y).
9 Choose Partial.
459