Gerber OMEGA CP Reference Manual page 597

3 In the Font Number text box, the system automatically enters the next available font
number to identify the font. You may also enter a font number manually by entering a
new number in the Font Number text box.
4 In the Cap Height Line text box enter the capital height line value. (This is the value
from the status bar, which you wrote down earlier.)
5 In the Space Character text box enter a space character value or use the default value
for that height.
6 Make a note of the Font Title, Font Number, Capital Height Line, and Space Character
values in case you want to add additional characters to the font.
7 Clear the Long Kern Table check box.
8 Click OK to enter the information and return to the Font Designer menu.
Note: The Block Descender and Block Height text boxes are not available unless you have the
entry bDefChBlk=1.
fontmakr.ini
To set the kerning
1 Click Setup! on the menu bar. The Font Designer status box opens as the font
processes.
2 After the font has processed, the Kern Setup dialog box opens.
3 Click GSP Defaults to use the GSP Kern settings.
4 Click Process. The GSP Defaults are automatically set for the PLT files of the font.
To process the font
1 The Kern Process dialog box opens. Use the scroll bar and click the right arrow to
choose a Kern Factor of 5.
583