Gerber OMEGA CP Reference Manual page 611

To choose the printer output
1 Click File > Print... to open the Print dialog box, and then click the Output tab.
2 Enter the margin measurements.
3 Choose an Output Type option:
♦
Black Wireframe for a black and white wire frame printout. When
Wireframe is activated you can enter a Line Width between 1 and 15. A
width between 3 and 6 is suggested.
♦
Wireframe for a color wire frame printout that simulates the vinyl colors.
When Wireframe is activated you can enter a Line Width between 1 and 15.
A width between 3 and 6 is suggested.
♦
Filled for a full color printout.
Tip: If the job contains an image and you choose the Filled Output Type, make sure you turn on
Tools > Options > View > Show Image so that the image prints.
4 Choose the Size:
♦
No Scaling to print jobs that are smaller than the paper size at actual size. (If
the job is larger than the paper size, it is automatically sized to fit the paper.)
♦
Size to Page to enlarge a smaller job to fill the page.
5 Click a position to choose the Placement on the page. The placement may be affected
by the size of the job and if No Scaling or Size to Page is turned on.
6 Click Print Preview if you wish to preview the job. Close the Print Preview window to
return to the Print dialog box.
8 Click OK to print, or click the Options tab to modify what is printed.
597