Gerber OMEGA CP Reference Manual page 85

Under standing Print Order in Composer
A vinyl co lor can be assigned to objects on different layers and each layer may have different
foils assigned to that vinyl. You could also have the same foils in a different stacking
a different layer.
The Print /Output Order dialog box in Composer offers the flexibility of working wit
layered or flattened Print Order if your job has layers. The default is a flattened (singl
Print Order. Any manua
different type are discarded. Click Arrange > Print/Output Order to open the dialog
Because each layer behaves like a separate job, each layer has a separate Print Order w
can be rea rranged. Foils cannot be moved from one layer to another in the Print/Out
Order dia log box.
The Rebuild button in the Print/Output Order dialog box returns the foil order f the
selected vinyl to the original st
discarded.
Click a vinyl to
display the list
of foils
assi gned to it.
Rearrange the
vinyl by
dragging and
dropping or
using the Up or
Dow n buttons.
l changes that were made to the Print Order before switching
acking (front to back) order. Any
Flat Print/Output Order
o
previous changes are
71
order on
h
e layer)
to a
box.
hich
put
Clear the Output
by Layer
check box to
fl atten the Print
Order
Rearrange the
foils by drag ging
and dropping in
the list or by
selecting a foil
and using the Up
or Down
buttons.
Clic king Rebuild
returns the Pr int
Order for the
selected vinyl to
the original
stacking orde r.
Unsele cted vinyls
are not affected.