Gerber OMEGA CP Reference Manual page 363

3 Activate any options in the Import dialog box. The availability of options depends on
the filter type chosen.
4 Click Options to Options dialog box for that file type. Change the settings as
appropriate. See "Importing Files Into Composer" for detailed information on each
filter's settings.
Note: When using some import filters, the Options dialog box will not display until after you
click Import.
5 Click OK to return to the Import dialog box.
6 Click OK to open the Select a Position dialog box.
7 In the Select a Position dialog box, indicate where you would like the image to appear
in the design in relation to the crosshair by choosing the appropriate placement
handle.
8 Click OK.
9 On the Composer work surface position the crosshair and click to place the image. The
Select Source Colorspace Profile dialog box appears if the image you are importing
does not have an embedded color profile.
Note: If you have setup your Color Management to have default color space profiles, these color
profiles will be used and OMEGA will not ask you to specify a source profile. If your Color
Management is set to Always Ask, then when it can't find a profile, or the image does not have
a profile OMEGA will ask you to specify one.
10 Choose an input profile and click OK. Refer to "Applying color profiles during
Import" for more information.
349