Gerber OMEGA CP Reference Manual page 504

490 Chapter 44:
Creating Special Effects
Distance
Distance is the space from a point on the original shape to the corresponding point of the layer.
Turning on the Spacing group box displays the X and Y text boxes. The X and Y axis specify the
distance and direction of the layer.
♦ X places the layer on a horizontal plane (to right or left of the original shape) according
to the value entered.
♦ Y places the layer on a vertical plane (above or below the original shape) according to
the value entered.
Application
Turn on Composite or Partials in the Application group box.
Composite merges the silhouettes of the original shape and the layer to create a single shape for
each layer. Using Composite eliminates the gap from vinyl shrinkage.