Gerber OMEGA CP Reference Manual page 670

656 Chapter 59:
Working with Oversized Jobs
To select all panels to print or plot
1 Click Layout > Panels to open the Panel Setup dialog box.
2 In the Select Panels to Print/Plot box click Select All.
3 Click OK.
To select a single panel to print or plot
1 Click Layout > Panels to open the Panel Setup dialog box.
2 There are two methods to choose a panel:
♦
In the Select Panels to Print/Plot box, enter the panel number to output in
the Panels text box.
OR
♦
Click Deselect All from the Select Panels to Print/Plot box, and click the
panel from the preview box you wish to output.
3 Click OK.
Tip: Determine the panel number by viewing the active job in the GSPPlot window.