Gerber OMEGA CP Reference Manual page 62

48 Chapter 5:
Setting Up Composer's Work Surface
Images tab
The Images tab of the Options dialog box contains settings for importing and editing images,
Thumbnail settings, and control of temporary embedded images files. Click Apply to confirm
the settings. Click OK to return to Gerber factory defaults.
Color Type
Choose the default Color Type to apply to imported images:
♦ Spot – Choosing Spot changes a full color image into a monochrome image consisting
of tones of the chosen Spot foil. See Default Spot Color below for details.
♦ Process – Choose Process to fill the imported image with Process color foils.
♦ Template – Choose Template to import an image as a Template that can be displayed
but not printed to a thermal printer. (A Template image can be printed on a paper
printer.) A Template is useful when digitizing shapes in images.
Default Spot Color
Default Spot Color is only available when Spot is chosen as the default Color Type. Click
Browse to select the foil palette and then choose the default spot color to apply to an
imported image.
TWAIN Device
Choose a TWAIN device connected to your computer that is to be used by the Scan to Vector
program. Click Select to display available choices for your system.
Image Editor
Choose an Image Editor program to be used when editing an image after it has been
imported into Composer. Click Browse and navigate to an image editing program (such as
MSPaint or Corel PhotoPaint) on your system. See the topic: Editing an image with an image
editor for details.