Gerber OMEGA CP Reference Manual page 637

3 Choose the type of information to include in the spool file.
♦
If you are saving a vinyl-only job click Cut Information.
♦
If you are saving a print and cut job, click Print Information and Cut
Information to minimize the time required when running the job later.
♦
Turn on View Spool File to automatically open the Spool File Viewer utility
where you can see an accurate representation of the job's foil colors and cut
objects as they are applied to the vinyl. See "Viewing a spool file" for
detailed information.
♦
If you choose Send File to EDGE/MAXX 2, you save an SPL file and output
the information to the selected thermal printer.
4 Click OK to confirm the choice and open the Save As dialog box.
5 Choose the folder to Save in.
6 Type the file name. Use a unique file name if you are saving SPL files for each layer in
a job, for example "Shrinking violet layer 1.spl."
7 Click Save.
Note: You cannot edit an SPL file. If you change the original PLT file you must save it again as
an SPL file to reflect the changes.
623