Gerber OMEGA CP Reference Manual page 388

374 Chapter 34:
Using Clipping Paths
♦ Any shape, text, small text or image can be clipped.
♦ Any single object can be clipped by only one clipping path container.
♦ Any shape, text, small text or image can be part of a clipping path container. For small
text, the outlines (glyphs) of the characters are used to define the container; for images,
the cropping rectangle is used.
♦ Only the path of an object is used to define a clipping path container. All other
attributes (such as fill or stroke) are ignored.
♦ To add a cut line to a clipping path you must assign a cut to the object being clipped
rather than the clipping path container. After Make Clipping Path, the cut will be
assigned to clipped object.
♦ A single member of a group or combine cannot be used in a clipping path set. It must
first be ungrouped or uncombined.
Rules for working with clipping paths
After creating a clipping path the following rules apply:
♦ Clipping paths can be edited using Detail Edit tools.
♦ You can select and move the clipping path container or clipped object after the
clipping path is created. Group the clipping path set to maintain position.
♦ You can Repeat or Merge a clipping path.
♦ You can rotate, slant and flip clipping paths, but if the clipping path set contains an
image, only the non-image objects are affected.
♦ You can not use Outline, Distortion, Warp, Shadow, or Effects on clipping paths.
♦ You can easily select the clipping path container or clipped object using the Layer
Manager.
♦ Release the clipping path by selecting it and using Shape > Release Clipping Path.
Images and clipping paths
You can use an image as the object to be clipped or as the clipping path. When an image is used
as a clipping path container, the cropping rectangle defines the path.
After making a clipping path you can layer the clipped object on an image or other object.
Image to be
clipped
Clipping path
container (in
this example, a
vector object)
Clipped object