Gerber OMEGA CP Reference Manual page 546

532 Chapter 48
Viewing and Printing Installed Fonts
3 Click Select All to choose all installed fonts or hold down the Ctrl or Shift keys while
clicking to select multiple fonts.
4 Click Print List (names only) to print the list of installed fonts.
Tip: If you are printing several font lists, click Save Selected to save the list in Font View
memory. Then, after printing you can return to the selection by clicking Restore Selection.
Printing installed font character sets
Print the font character sets to use as a handy reference. Font sets include upper and lowercase
characters, as well as accented and special characters that are available only from keycodes.
When printing font character sets, you can choose to print one, more than one, or all of the
installed fonts. As the default, fonts are sent to the printer as bitmap files. If you experience long
time delays when printing, send the fonts to the printer as vector files. In the Display Settings
dialog box, turn off Send bitmaps to the printer instead of vectors and reprint.
In the Fonts Selected for Printing dialog box, you can specify how the font will print.
♦ Measurement mode — choose inches, centimeters, millimeters, or points.
♦ Text Height — enter a character size between 0.14 and 10.00 inches (3.528 - 254.000
mm, 0.353 - 25.400 cm, or 10 - 720 points). Entering a character size beyond the legal
limits returns the closest legal value.
♦ Wire Frame Text — turn on to print the characters in wire frame mode. Turn off to
print the characters in filled mode.
♦ One Font Per Page — turn on to print one font per page or turn off to allow multiple
fonts on one page.
♦ Left Margin in (inches) (extra space for hole punch) — enter a left margin between
0.001 and 4.000 inches.
Tip: You can access the Fonts Selected for Printing dialog box by right-clicking the GSP Tray
icon and choosing Gerber Installed Fonts.
To print the font character set
1 Click Start > Programs > GSP OMEGA > Font View.
2 Click File > Print. The Please wait while fonts are enumerated message box displays as
the list of fonts is built. Upon completion, the Font Select dialog box opens. The list of
installed fonts appears in the Fonts text box.