530
Chapter 48
Viewing and Printing Installed Fonts
6 Click anywhere in Font View to return to the font character set.
Changing display settings
The Display Settings dialog box in Font View allows you to change how characters display on
the buttons or individually. You may alter from the following settings:
♦
Button attributes
♦
Keycodes — choose Decimal, Hexadecimal, or Hidden keycodes.
♦
Character size — enter a size between 0.25 and 4.00 inches (6.35 - 101.6 mm).
Entering a character size beyond the legal limits returns the closest legal
value.
♦
Show Filled — turn on to display the characters in a filled mode on the
buttons. Turn off to display the characters in wire frame mode.
♦ Character attributes
♦
Show Points — turn on to display individual character in outline mode with
connection points.
♦
Show Filled — turn on to display individual characters in filled mode.
♦ Send bitmaps to printer instead of vectors? Turn on this option to send the font to
the printer as a bitmap file. Turn off this option to send the font to the printer as a
vector file. Depending on your system configuration and your printer, sending the
font as a vector file may significantly decrease printing time. If you experience long
delays when printing a font using a bitmap file, turn off this option and send the font
to the printer as a vector file.
To change the Display Settings
1 In Font View, click Settings... to open the Display Settings dialog box.