Gerber OMEGA CP Reference Manual page 751

Note: The following instructions are based on using a Windows XP version peer-to-peer
network. Other versions of Windows may be slightly different. When using Windows 2000 or
XP, you must be logged in as an Administrator, Server Operator, or Power User to share
folders or drives. If you are using another network, please refer to the instructions that came
with the computer to share connections on that network.
To connect the output devices for sharing, you'll need to:
♦ Share the Queue folder.
♦ Create a new Share name: gspqueue.
♦ Map a network drive to the gspqueue folder.
♦ Setup the output device in GSP Setup – refer to "Installing Hardware" for further
information.
To share the Queue folder
1 Using the illustration above as a guide, on Computer A open Windows Explorer.
2 Right-click the Queue folder and choose Sharing and Security to open the Queue
Properties dialog box Share tab.
Note: If the Sharing tab is unavailable in the QUEUE folder, stop the procedure and perform
the following:
737