Gerber OMEGA CP Reference Manual page 589

6 Enter the Space Character value or accept the default value for that Cap Height.
7 To set parameters for a connected font, turn on the Character Width Defined by
Baseline check box.
8 To set the parameters for a clean out font, turn on the Clean Out Font check box.
9 For GERBER EDGE fonts click the GERBER EDGE font check box.
10 To maintain linear or radial fills (fades) across combined characters, click the Some
Fills applied to Multiple Characters check box.
11 For URW fonts or to establish consistent mechanical spacing, turn on the Select the
Long Kern Table check box.
Note: Make a note of the Font Title, Font Number, Capital Height Line, and Space Character
values so that you will be able to add additional characters to the font.
12 Click OK to enter the information and return to the Font Designer work space.
To set the font styles
1 Click File > Font Settings to open the Font Settings dialog box.
2 Click Styles to open the Set Font Style dialog box.
3 Click the Font Style to which the font belongs. You may choose more than one style
category.
4 Click OK.
To set the kern characters for a font
1 Click File > Font Settings to open the Font Settings dialog box.
2 Click Kerns to open the Set Kern Characters dialog box.
575