Gerber OMEGA CP Reference Manual page 217

To choose a linear process fill
1 Click Fill to open the Fill tab of the Assign Colors dialog box.
2 Choose Linear in the Fill Type group box.
3 Choose Process in the Color Type group box.
4 Choose a palette in the drop down list.
5 Click the color sample button to open the process color palette and select a color, then
click Select.
6 Enter the Position % or double-click one of the position slider buttons and move the
position slider arrow to visually move the fill %.
7 Enter angle in the Linear Angle group box or click inside the sample fill box and
visually adjust the linear angle. A preview of the angle shows in the sample fill box.
8 Click OK.
Choosing a radial process fill
Using Radial fills with process colors creates fades that blend from one position percentage to
another in concentric circles from the inside of the shape outward. Position places the fill based
on a percentage from 1 to 100%. When using Radial fills the Radial Center Offset is available. It
allows you to shift the center of a radial fill away from the center of the selected shape by
entering X and Y % offsets. When applying a radial fill to an object using process colors, there
are four attributes that must be assigned to the fill: Palette, Color, Position, and Radial Center
Offset.
203