Gerber OMEGA CP Reference Manual page 619

To output a job by layers
1 With a job open in Composer, click File > Output By Layer to open the Output By
Layer dialog box. All layers are selected to output (box is checked).
2 Clear the checkbox for any layer (or vinyl on that layer) that will not be output to
GSPPlot. An asterisk before a layer name indicates a locked or hidden layer. Hidden
layers are not output even if they are turned on in this dialog box. Locked layers are
output.
3 When sending multiple vinyls, turn on Output by Separations and Pause between
Separations to allow you to change the vinyl between operations.
4 Turn on Reduce Frame to shrink the weed border around the job to conserve vinyl.
Clear this option to ensure that the objects on that layer are output in the correct
location compared to other objects in the job.
5 Click OK, gspplot – QuickPlot opens with the objects of the selected layer displayed on
the work surface. If you have to output more than one layer you can display the next
layer using the Prior Vinyl and Next Vinyl buttons.
Naming a Quick Plot job when outputting to GSPPlot
You can name a Quick Plot job (or a selected portion of the job) while sending it to GSPPlot.
Hold down the Shift key while choosing File > Output All, Output Selected, Output by Vinyl or
Output by Layer to open the Quick Launch – Assign Job Name dialog box.
Note: You must hold down the shift key until the Quick Launch – Assign Job Name dialog box
displays on the screen or Windows task bar. If you release the Shift key too quickly the Assign
Job Name dialog box does not display.
605